Chromatography Columns and Cartridges
MilliporeSigma™ Supelco™ SUPELCOSIL™ LC-DP Supelguard Cartridge Kit, 5 μm Particle Size
Contains a diphenyl bonded phase, which gives greater selectivity for aromatic groups compared to alkyl-type bonded phases.
MilliporeSigma™ Supelco™ SUPELCOSIL™ LC-NH2 Supelguard Cartridge Kit, 5 μm Particle Size
SUPELCOSIL™ LC-NH2 Supelguard™ Cartridges contain a SUPELCOSIL™ packing, in a 2 cm stainless steel body, enclosed by polyether ether ketone (PEEK) encapsulated stainless steel frits (2 μm porosity).
MilliporeSigma™ Supelco™ SUPELCOSIL™ LC-ABZ Supelguard Cartridge Kit, 5 μm Particle Size
SUPELCOSIL™ LC-ABZ phase has a unique deactivation technology which provides excellent reversed-phase performance for basic compounds, as well as those that are acidic, polar neutral, and non-polar.
MilliporeSigma™ Supelco™ SUPELCOSIL™ LC-CN Supelguard Cartridge Kit, 5 μm Particle Size
The LC-CN phase is often used as a substitute for silica because it offers the advantages of a bonded phase (such as quick equilibration, and less sensitivity to small changes of the water content in the mobile phase).
MilliporeSigma™ Supelco™ SUPELCOSIL™ LC-1 Supelguard Cartridge, 5 μm Particle Size
Due to a mixed retention mechanism, selectivity differences for polar groups are more pronounced than on C8 and C18 columns. C1 columns require 20-30% less organic modifier to provide retention similar to C18 columns.
MilliporeSigma™ Supelco™ Empty Glass GC Column, for Varian™ 3000, 4000, 6000, and Vista (FID, Inj. A to Det. A, On-Column)
Empty column may be used for packing adsorbents for temperature-programmed desorption (TPD) instrumentation.
MilliporeSigma™ Chromolith™ High Resolution RP-18 Endcapped HPLC Guard Cartridges
Chromolith™ High Resolution 2 mm I.D. columns have macropores with 1.15 μm diameter, giving a column efficiency exceeding 140,000 plates/meter. The mesopores are 15 nm (150 Å), the surface modification is octadecylsilan with full end-capping.
MilliporeSigma™ Chromolith™ WP 300 Epoxy HPLC Column, 2 mm
Chromolith™ WP 300 columns allow flow rate flexibility for much higher throughput and more solvent options for optimum selectivity.
MilliporeSigma™ Chromolith™ WP 300 RP-18 HPLC Guard Cartridges
Chromolith™ WP 300 columns allow flow rate flexibility for much higher throughput and more solvent options for optimum selectivity.
Thermo Scientific™ POROS™ R1 20 μm Column, Stainless Steel, 2.1 x 30 mm, 0.1 mL
Thermo Scientific™ POROS™ Prepacked Reversed-Phase Column. POROS™ R1 is a 4000 angstrom pore size Poly[styrenevinylbenzene] particle, suitable for the reversed-phase separation of biomolecules.
Thermo Scientific™ POROS™ R1 20 μm Column, Stainless Steel, 4.6 x 100 mm, 1.7 mL
Thermo Scientific™ POROS™ Prepacked Reversed-Phase Column. POROS™ R1 is a 4000 angstrom pore size Poly[styrenevinylbenzene] particle, suitable for the reversed-phase separation of biomolecules.
MilliporeSigma™ Supelco™ Ascentis™ Express C18 HPLC Column, 2.7 μm Particle Size
Ascentis™ Express HPLC columns, through the use of Fused-Core™ particle technology, can provide you with both the high speed and high efficiencies of sub-2 μm particles while maintaining lower back pressures.
MilliporeSigma™ Supelco™ apHera™ NH2 HPLC Column, 5 μm Particle Size
apHera™ amino columns are based on covalently bonded polyamine specifically optimized for the separation of mono- and oligosaccharides.
MilliporeSigma™ Supelco™ Watercol™ 1910 Capillary GC Column, df 0.20 μm
Enables the convenient measurement of water by GC.
MilliporeSigma™ Supelco™ SPB™-624 Capillary GC Column, df 1.4 μm
Designed for purge-and-trap analyses of volatile halogenated, non-halogenated, and aromatic contaminants from environmental samples.